3D Printed Roof Hinge STL

Great and simple hinge that allows you to use EMT or PVC as legs to create a hinge mount for your props. You will be receiving two different STLs, 1/2 EMT (Found here: Conduit) or 1/2 PVC (Found here: PVC Pipe).

Using (2) 1/4in diameter bolts and nuts you can easily reach an appropriate angle for any pitch to make your props plum on your roof.

The lower bolt is the pivot point for the pipe and the upper bolt will lock in the angle. The two pipes rest on the roof and you just lay a small sandbag over them using a few small screws to hold them in the main unit. For stability it is highly recommended to use heavy sandbags or other material to weigh down the props on your roof.

Also, one hinge recommended for 150-pixel props or less. Bigger props can be accommodated by using multiple roof hinges together.

Being a digital product, once you download the file or files, all sales are final, and no credit or refund can be offered.

Personal Use Only

STL Files Disclaimer:

STL files are intended solely for your own personal home use and may not be used for commercial purposes. Your purchase or free download of one of our products constitutes our granting to you of a non-exclusive, non-sublicensable, non-transferable license to download and access that product for the purpose of your own personal use and reference, and 3D print or otherwise convert the product to physical form for your own private use.

For the avoidance of doubt, you shall not copy, re-sell, sublicense, rent out, share, post to any website or otherwise distribute any of our products, whether modified or not, to any third party or any individual. This includes both the digital file and the 3D printed physical product created from the digital file. This means that you must print the file or files yourself, on your own private printer, and under no circumstance may you have someone else, or another business print the parts for you.

The products, whether modified or not, and all intellectual property of Your Pixel Store LLC are and shall at all times remain our sole and exclusive property. You agree that under no circumstances, whether the product has been modified or not, shall you have or attempt to claim ownership of any intellectual property rights or copyright in the product.

3D Printed Globes – Snowflake Set – About 11-inch (STL)