Full Build – 3×6 P5 Outdoor Enclosure – 3 panels Long by 6 panels Tall = 18 panels = About 39″ L x 5″ W x 39″ H

Outdoor Enclosure 18 panels – 3 panels wide by 6 panels height: About 391″ x 5″ x 39″

Outdoor Enclosure 18 panels: Now being offered in 2 options: No edge and Edge

1. No Edge – Same as before allows for expansion as units can be combined seamlessly. Best solution for those who would like to expand their screen size in the future.
2. Edge – This unit will have a protective edge lip around the whole unit to protect the panels from accidental damage. Panels can still be combined however it will have a gap between the panels. Best solution for those who have no plans to expand the size of their screen.

Full Build – P5 Outdoor Enclosure – 3 panels Long by 6 panels Tall = 18 panels – About 39″ x 5″ x 39″

This is for 1 outdoor P5 panel enclosure completely built and ready to go. Just plug in to your computer and configure to xlights or FPP following this video:

Setting up a P5 Panel with FPP and xLights – The Easy Way

Enclosure is made of aluminum and is about 39-inch (Height) x 39-inch (Length). Price includes enclosure, the P5 Outdoor Panels, meanwell power supply, colorlight controller, data cables, and power cables. No assembly required.

DO NOT CONFIGURE IN LEDVISION AS IT COMES SETUP ALREADY.

• Just plug in to your computer and configure to xlights and FPP following this video: Setting up a P5 Panel with FPP and xLights – The Easy Way
• RASPERRY PI IS REQUIRED IF YOU PLAN TO USE WITH XLIGHTS AND/OR FPP.
• IF THERE IS FLICKERING ON THE PANELS YOU NEED A FIRMWARE UPGRADE, Starts at 32 min mark: xLights Gems: P5 Panel setup with Colorlight card.

Full Build – P5 Outdoor Enclosure – 3×2 = 6 panels