YPS Large Controller Enclosure – About 19.7″ x 13.78″ x 8.1″

Enclosure size is about 19.7in x 13.78in x 8.1in (This box is about 4 inches taller and 2 wider than the Bud Box 32026). Box comes with vents pre-installed. Plus there is a set spot in the box for fan to be added to help with removing heat from inside the box. This box is able to hold 6 Meanwell power supplies plus Falcon F16 with two expansion boards.

Box will have opening at bottom so you will get to choose from pre-drilled plates that support most popular controllers and configurations such as the Falcon and Kulp controllers. Box comes standard with 16 port template. Advance templates are additional cost.

These are additional items required to build a full box:

• • Power supplies – Power Supplies and Accessories

  • AC Power Cords – Extensions

  • PG7 and P9 Gland Pack – PG Glands

  • Network Gland – RJ-45 Waterproof Connector

  • 10AWG Bulk Cable Red – 10AWG Bulk Cable Red

  • 10AWG Bulk Cable Black – 10AWG Bulk Cable Black

  • Pigtails for Controller – Pigtails

These are optional items, but recommended:

• • Heat Shrink Labels – Heat Shrink Tube Label

  • Temperature Control Module – Thermostat and Temperature Controller (Fahrenheit)

  • Voltage Module –